Sol-Gel Derived Titania Coating on Titanium Substrate Sol-gel derived titania coating
Iranian Journal of Pharmaceutical Sciences,
Vol. 4 No. 1 (2008),
15 January 2008
,
Page 17-22
https://doi.org/10.22037/ijps.v4.39790
Abstract
The synthesis of titania via sol-gel method has been widely studied. In thepresent work, titania was deposited onto a titanium substrate via sol-gel method.Different processing parameters such as the repetition number of dipping/heattreatment process and dipping time have been studied to obtain the homogenous titaniacoating. Phase and microstructural evaluation of the powder and coating sampleswere performed, using X-ray diffraction and scanning electron microscopy. Theparticle size distribution of the powder was measured by zetasizer instrument.Based on the results obtained in this work, both rutile and anatase phases formedafter the heat treatment at 600 °C. In addition, the thickness and the morphologyof the coatings were found to be influenced by the repetition number of process.
- Anatase
- Coating
- Nano powder
- Rutile
- Sol-gel
How to Cite
References
[2]Xiao XF, Liu RF, Zheng YZ. Characterization ofhydroxyapatite/titania composite coatingcodeposited by a hydrothermal-electrochemicalmethod on titanium. Surf Coat Technol2006;200: 4406-13.
[3]Kolen'ko YV, Maximov VD, Garshev AV, MeskinPE, Oleynikov NN, Churagulov BR.Hydrothermal synthesis of nanocrystalline andmesoporous titania from aqueous complex titanyloxalate acid solutions. Chem Phys Lett2004;388: 411-5.
[4]Liu JX, Yang DZ, Shi F, Cai YJ. Sol-gel depositedTiO2film on NiTi surgical alloy for biocompat-ibility improvement. Thin Solid Films2003; 429:225-30.
[5]Liu X, Yang J, Wang L, Yang X, Lu L, Wang X.An improvement on sol-gel method for preparingultrafine and crystallized titania powder. Mater SciEng A2000; 289: 241-5.
[6]Han Y, Hong S-H, Xu K. Synthesis of nanocrys-talline titania films by micro-arc oxidation. MaterLett2002; 56: 744-7.
[7]Lee BI, Wang X, Bhave R, Hu M. Synthesis ofbrookite TiO2 nanoparticles by ambient conditionsol process. Mater Lett2006; 60: 1179-83.
[8]Manso M, Ogueta S, Garcia P, Perez-Rigueiro J,Jimenez C, Martinez-Duart JM, Langlet M.Mechanical and in vitrotesting of aerosol-geldeposited titania coatings for biocompatibleapplications. Biomaterials2002; 23: 349-56.
[9]Balamurugan A, Balossier G, Kannan S, MichelJ, Rajeswari S. In vitrobiological, chemical andelectrochemical evaluation of titania reinforcedhydroxyapatite sol-gel coatings on surgical grade316LSS. Mater Sci Eng2007; 271: 162-71.
[10]Harle J, Kim HW, Mordan N, Knowles JC. Initialresponses of human osteoblasts to sol-gelmodified titanium with hydroxyapatite and titaniacomposition. Acta Biomater2006; 2: 547-56.
[11]Manso M, Langlet M, Ferandez M, Vazquez L.Surface and interface analysis ofhydroxyapatite/TiO2biocompatible structures.Mater Sci EngC 2003; 23: 451-4. [12]Areva S, Paldan H, Peltola T, Narhi T, Jokinen M,Linden M. Use of sol-gel-derived titania coatingfor direct soft tissue attachment. J Biomed Mater2004; 70: 169-78.
[13]Xu W, Hu WY, Li MH, Ma QQ, Hodgson PD,Wen CE. Sol-gel derived HA/TiO2doublecoatings on Ti scaffolds for orthopedic application.Trans Nonferrous Met Soc China2006; 16: 209-16.
[14]Milev A, Green D, Chai CS, Ben-Nissan B.Coating of the orthopedic titanium alloys with sol-gel derived hydroxyapatite. 11th AustralianConference on nuclear techniques of analysis.Sydney: Australian institute of nulear sciencesengineering (E2).
[15] Shi P, Geng F, Cheng FT. Preparation of titania-hydroxyapatite coating on NiTi via alow-temperature route. Mater Lett2006; 60:1996-9
- Abstract Viewed: 264 times
- IJPS_Volume 4_Issue 1_Pages 17-22 Downloaded: 189 times